Wi-Fi router SNR-CPE-ME2-SFP Lite, WIFi-5, Gigabit Ethernet, 1xSFP WAN Port


$ 58.60
Wi-Fi router AC1200, IEEE 802.11 a/b/g/n/ac 1GE SFP WAN 4 GE LAN. IPv6, IGMP, TR-069

Technical Specifications

  • Supported MIMO, 2,4MHz 2x2
  • Supported MIMO, 5MHz 2x2
  • Wi-Fi Technology (1) 802.11a
    802.11ac (Wi-Fi 5)
    802.11n (Wi-Fi 4)
  • LAN Speed 100 Mbit/s, 1000 Mbit/s
  • WAN Speed 100 Mbit/s, 1000 Mbit/s
  • Power supply (2) 12V DC, 1.5A
  • Management (1) SSH
  • USB port Non-available

Product Info

Part number: SNR-CPE-ME2-SFP Lite

Gigabit Router SNR-CPE-ME2-SFP Lite class AC1200 with support for 802.11ac Wave2!

Hardware platform

Four antennas and MU-MIMO support will ensure stable and uninterrupted communication throughout the house, and if the area is too large, the router can easily be used to expand the network coverage area.

The modern hardware platform allowed combining high performance in the wired and wireless segments. The software's capabilities will allow you to use the device at home and in the office.

Unlike the ME2-SFP model, the new model has reduced the amount of RAM without reducing performance, and the USB interface is excluded, There is support for a speed of 100 Mbit/s on the SFP WAN interface

100/1000 WANSFP port

For use in FTTH networks.

Advanced Wireless Network capabilities

SNR-CPE-ME2-SFP Lite software supports the latest technologies that provide high performance even when working with multiple wireless clients

MU-MIMO (Multi-user, multiple-input, and multiple-output) - provides the ability to exchange information to several connected devices simultaneously, not in turn, as before.

Airtime Fairness - divide the data transfer time between all customers and eliminate the impact of technologically old customers and low-signal customers on the wireless network

Beamforming - allows you to generate a signal in the direction of the intended wireless device rather than sending it randomly in all directions.

Working with multimedia services

SNR-CPE-ME2-SFP Lite is suitable for subscribers connected to the IPTV service. Multicast support, IGMP Snooping, Multicast-to-Unicast, and multicast/broadcast traffic isolation ensure high-quality and stable operation of IP television, including on Wi-Fi clients (please note that the latter is not recommended for this technology). To watch IPTV on devices that do not support Multicast, a xupnpd DLNA server has been added to the router's software, which allows you to download the provider's playlist directly to the router and use it as a media server.

Flexibility and manageability

Thanks to many configurable parameters, modifying the firmware for specific tasks is possible without rebuilding the software. Compatibility with CWMP v1.0 (TR-069) and v1.8 (TR-098) is implemented for centralized device management. Also, for all Wi-Fi routers of the SNR-CPE series, full-fledged management and receipt of all statistical data via SSH are available. Mobile application SNR-CPE-Config allows you to configure and manage the router both locally and remotely comfortably.

IPv6 Support

The SNR-CPE-ME2-SFP Lite Wi-Fi router has IPv6 support, including Native Dual Stack over IPOE/PPPOE with DHCP+RA, 6to4 mode, as well as radvd and dhcp6s services.

For telecom operators

A flexible set of proposals for customization of Wi-Fi routers SNR-CPE has been developed for telecom operators. It is possible to change the case, the box, customization of the software for the needs of a particular network. Diagnostic tools and remote access via ssh or cwmp will allow you to solve user problems and prevent problems on the network quickly. The software is developed taking into account the peculiarities of the Russian market and the CIS countries.

For corporate clients

Flexibly configurable roaming based on 802.11k/r and the Handoff principle is implemented for corporate networks. An external controller is not required. For client devices that do not support 802.11k/r roaming protocols, a universal Handoff tool is implemented with a large number of parameters that allow you to flexibly configure the logic of interaction of the router's Wi-Fi interface with client devices based on the signal strength values.

SNR-CPE-ME2-SFP Lite supports enterprise-level WPA-Enterprise wireless network protection technology, which provides dynamic key assignment individually for each wireless client. The Radius server generates the keys. Wi-Fi routers SNR-CPE support Hotspot mode (Chillispot support). There is also a built-in NoDogSplash hotspot server.

For effective management of various wireless networks on the same access point (MBSSID), the wireless network encapsulation function is implemented in 802.1q— WLAN to VLAN, which allows you to apply the necessary policies to a separate wireless network on an upstream gateway.

Operational support

Placing the development in Russia, we can provide high-quality and fast product support.

Package contents:
- SNR-CPE-ME2-SFP Lite router;
- Power adapter;
- Ethernet cable;
- instructions for use.

Additional characteristics


RAM volume


Flash volume

16 MB

Preset software


Wireless interface

IEEE 802.11b/g/n, 2t2r,2.4-2.4GHz

IEEE 802.11an/ac wave2, 2t2r, 5.1- 5.8GHz


2.4GHz - 20dBm
5GHz - 20dBm

Receiver sensitivity




4x5dBi, omnidirectional

Modulation type



Handoff, 802.11k/r

Operating temperature

0°C~40°C (32°F~104°F)

Storage temperature

-40°C~70°C (-40℉~158℉)

Working humidity

10%~ 90%, non-condensing

Storage humidity

5%~95%, non-condensing

Technical Specifications

  • Supported MIMO, 2,4MHz 2x2
  • Supported MIMO, 5MHz 2x2
  • Wi-Fi Technology (1) 802.11a
    802.11ac (Wi-Fi 5)
    802.11n (Wi-Fi 4)
  • LAN Speed 100 Mbit/s, 1000 Mbit/s
  • WAN Speed 100 Mbit/s, 1000 Mbit/s
  • Power supply (2) 12V DC, 1.5A
  • Management (1) SSH
  • USB port Non-available
  • Dimension, mm (2) 141x195x25mm
  • Wireless WAN Available
  • Frequency coverage, MHz 2.4
  • LAN port 4
  • WAN port 1
  • Repeater option Available

Wi-Fi router...

$ 58.60