Voltage (DC) sensor SNR-SHUNT
SNR-SHUNT-1.1
$ 93.16
Sensor for measuring voltage and residual charge on batteries. Works with SNR-ERD-4s.
Product Info
Part number: SNR-SHUNT-1.1SNR-SHUNT is made specifically for SNR-ERD-4 devices. The device is designed to monitor the condition and residual capacity of the battery by measuring the voltage and charge/discharge current. Monitoring of the measured parameters of the battery is available. The measured data is available via the WEB and SNMP interfaces of the universal monitoring device SNR-ERD-4.
Main Features:
1-WIRE interface;
Powered by 1-WIRE bus (connecting up to 10 devices);
The measured voltage is 9-85 V;
The measured current through the built-in shunt is 0-20±0.1 A (30 A for 5 minutes);
The measured current through the external shunt is 0-100±0.5 A;
Registration of the following parameters (SNMP, WEB):
Battery voltage;
Charge/Discharge current;
Shunt temperature;
End time and end date of the charge;
Battery capacity;
The number of full discharge/charge cycles.
SNMP monitoring with event logging is available:
Battery voltage reduction;
Excess current;
Exceeding the temperature of the shunt.
Calculation of the operating time of the battery load