On-Line SNR uninterruptible power supply unit of the BASE series, 20kVA / 20kW, without battery (charge current 12A)

SNR-UPS-ONT-020-BXL31

$ 1,790.00
UPS series BASE, TOWER, power 20kVA/20kW, number of connectable batteries 16-20 pieces, charging current 12A.

Technical Specifications

  • Type of UPS Tower
  • Weight, kg (1) 26
  • Operating temperature, °C (1) 0
    40
  • Phase 3
  • Input voltage 190-499V
  • Battery type Lead-acid (external, ordered separately)
  • Type of UPS (1) On-line
  • Without built-in batteries Available

Product Info

Part number: SNR-UPS-ONT-020-BXL31
The On-Line SNR BASE series uninterruptible power supply, with a capacity of 20kVA/20kW and without batteries (charging current of 12A), is designed with a double conversion (on-line) scheme. It provides a load with stabilized sinusoidal voltage and is intended for powering high-precision measuring and medical equipment, protecting servers, telecommunications, network and industrial equipment. Power failures can occur at unpredictable times and the quality of electricity can also vary over time. Power-related problems are dangerous for IT equipment, leading to damage to important data, loss of unsaved work sessions, and equipment breakdown - all of which can result in many hours of downtime and expensive repairs. The Intelligent series of uninterruptible power sources easily solves these problems, providing high reliability. The UPS operates using digital signal processing (DSP) technology, which ensures the highest reliability and operational characteristics with a unique device compactness. The extended range of input voltage allows for less frequent use of battery energy, which extends their service life. The input power factor of one eliminates the negative impact of the UPS on the input power grid, which, in combination with the unique range of input frequency, provides high-quality voltage when powered not only from the most problematic power grid, but also from generator sets. On the LCD display, you can control and monitor all the operating parameters and check for alarm information.
Main advantages:
  • A power output coefficient of 1
  • Supports the ability to connect up to 4 UPS in parallel. Provides a 3+1 redundancy scheme
  • Pre-installed functions: RS232, cold start; Optional: LBS, parallel card, USB, SNMP card
  • Flexible battery configuration from 16 to 20.
  • The control panel is user-friendly and provides a better understanding of the UPS's working status and parameters
  • Emergency shutdown function via the remote power-off port (EPO - Emergency Power-off)
  • Using DSP digital management technology, the system has high stability, self-protection, and diagnostic capabilities for faults
  • Thanks to the intelligent fan design, the speed can be automatically adjusted according to the load condition, reducing energy consumption and noise
  • An intelligent charging mode is used to increase the battery life
  • No impact on the input network

Technical Specifications

  • Type of UPS Tower
  • Weight, kg (1) 26
  • Operating temperature, °C (1) 0
    40
  • Phase 3
  • Input voltage 190-499V
  • Battery type Lead-acid (external, ordered separately)
  • Type of UPS (1) On-line
  • Without built-in batteries Available
  • COM port RS232)
  • Maximum number of lines 4
  • Number of batteries 20
  • Battery charging current, A 12
  • Expiratory phase 1
  • Battery voltage 192
    216
    240
  • Output power factor, RF 1
  • Power, VA 20000
  • Power, W 20000
  • Intput frequency, Hz 40-70

On-Line SNR uninterruptible...

$ 1,790.00