SNR-UPS-LID-600-LED-C13-PRO
SNR-UPS-LID-600-LED-C13-PRO
$ 16.00
UPS SNR Line-Interactive, 600 VA/360 W, 4xC13, LED Dear customers, This UPS is new but discounted due to wear and tear of the battery caused by prolonged storage. Complaints regarding the built-in battery will not be accepted. Some capacity is still left in the battery. The battery can be replaced with: SNR-BAT-12-7.2-GP, SNR-BAT-12-9-GP or equivalents.
Technical Specifications
- Type of UPS Desktop
- Weight, kg (1) 4,2
-
Operating temperature, °C (1)
0
40 - Phase 1
- Input voltage 162-295 V (AC)
- Battery type Lead-acid
- Type of UPS (1) Line-interactive
- Dimension, mm (1) 165x90x305
Product Info
Part number: SNR-UPS-LID-600-LED-C13-PROLinear-interactive uninterruptible power supplies (UPS) SNR are designed to protect personal computers, workstations, and servers equipped with switching power supplies. Thanks to the built-in battery, the UPS can operate even in the event of a complete power outage, allowing the user to save data and properly shut down the operating system. SNR-UPS-LID power supplies have a built-in autotransformer that regulates the output voltage when the network voltage changes. In case of excessive voltage, the autotransformer lowers the output voltage to an acceptable level, and in case of excessive decrease, it raises it. The autotransformer ensures a specified level of output voltage during network voltage fluctuations from the nominal level. A wide range of allowable network voltages reduces the number of cases when the UPS switches to battery power and significantly extends the battery life of the UPS. SNR-UPS-LID is equipped with a \"cold start\" function, which allows the user to forcibly turn on the UPS in the absence of network voltage. The built-in USB port allows monitoring of the main UPS parameters from a computer and performing proper shutdown in automatic mode.
Features:
Automatic voltage regulation (AVR)
Wide range of automatic regulation of input voltage
Digital microprocessor control
Indication of main UPS operation modes
Approximated sinusoidal output voltage when operating on battery power
\"Cold start\" function
Transformer thermal protection
USB port for UPS monitoring
Self-diagnostics
Protection against overcharging and deep discharge
Protection against short circuits and overloads
Package contents:
User manual
USB interface cable
CD with software
Technical Specifications
- Type of UPS Desktop
- Weight, kg (1) 4,2
-
Operating temperature, °C (1)
0
40 - Phase 1
- Input voltage 162-295 V (AC)
- Battery type Lead-acid
- Type of UPS (1) Line-interactive
- Dimension, mm (1) 165x90x305
- COM port USB
- Maximum number of lines 1
- Percentage of moisture 20-90% (non-condensing)
- Number of batteries 1
- Hour battery rating, A 7
- Battery charging current, A 1
- Expiratory phase 1
- Output Voltage 220 V ±10% (AC)
- Type and number of outlet sockets IEC 320 C13 x 4
- Battery voltage 12
- Input connections Built-in power cord with Schuko plug
- Backup power supply time at 50% load 5 minutes
- Output power factor, RF 0,6
- Power, VA 600
- Power, W 360
-
Efficiency in mains operation
70% in battery operation mode
96% in mains operation mode - Intput frequency, Hz 50/60 Hz ±10% (auto-detection)
- Output frequency, Hz 50/60 Hz ±10% (auto-detection)