Uninterruptible power supply SNR-UPS-LID-800-LED-C13, Line-Interactive, 800VA, 220-240VAC, 12VDC (1x7Ah)
SNR-UPS-LID-800-LED-С13
$ 55.00
Line-Interactive, Tower, 800VA/480W, 220-240VAC (50/60Hz), 1ph+N+PE, 12VDC (1x7Ah), USB, RJ-45, 3 x C13 (Outputs), LED
Technical Specifications
- Type of UPS Desktop
- Weight, kg (1) 6,7
-
Operating temperature, °C (1)
0
40 - Phase 1
- Input voltage 165-275 V (AC)
- Battery type Lead-acid
- Type of UPS (1) Line-interactive
- Dimension, mm (1) 165 x 95 x 340
Product Info
Part number: SNR-UPS-LID-800-LED-С13Linear-interactive uninterruptible power supplies (UPS) SNR, LID-XXXX-LED series, occupy an intermediate position between simple, inexpensive standby power sources ("Off-Line") and efficient, expensive double-conversion UPS ("On-Line"). The main difference between LID-XXXX-LED series UPS and standby power sources ("Off-Line") is that it is capable of providing normal power to the load, even with deviations in network voltage parameters, without switching to battery mode, which positively affects the service life of the built-in UPS batteries. LID series UPS is equipped with a "cold start" function, allowing for forced UPS startup in the absence of network voltage, as well as an "auto-start" function, allowing for automatic resumption of load power when network voltage is restored, without the need for additional manipulation. The built-in USB port allows for control of the main UPS parameters from a computer, as well as performing correct shutdown in automatic mode. In addition, the UPS is equipped with a multifunctional LED indicator that displays the state of the electrical network, load level, battery discharge level, and signals malfunctions. This series of UPS provides output voltage with an approximated sine wave and is primarily designed for connecting equipment with pulse power sources, such as personal computers, LAN nodes, and other electronic devices equipped with similar power sources, which are practically insensitive to the shape of the feeding voltage sine wave and its short-term drops (switching time to battery mode). The advantage of linear-interactive UPS is their comparative simplicity and reliability, lower cost compared to "On-Line" solutions, as well as high efficiency in "network" mode. As for the drawbacks, there is a slight delay (a few milliseconds) when switching to battery mode, as well as a stepped (less smooth compared to "On-line") regulation of the output voltage. Features include a built-in autotransformer that regulates the output voltage (AVR), a wide range of automatic regulation of the input voltage, digital microprocessor control, indication of the UPS operating modes, approximated sine wave output voltage when running on battery power, a "Cold Start" function, thermal protection of the transformer, a USB port for monitoring the UPS status, an "Auto Start" function, self-diagnostics, protection against overcharging and deep discharge, protection against short circuits and overloads. The package includes an operating manual, a USB interface cable, spare fuses, and a CD with software.
Technical Specifications
- Type of UPS Desktop
- Weight, kg (1) 6,7
-
Operating temperature, °C (1)
0
40 - Phase 1
- Input voltage 165-275 V (AC)
- Battery type Lead-acid
- Type of UPS (1) Line-interactive
- Dimension, mm (1) 165 x 95 x 340
- COM port USB
- Maximum number of lines 1
- Percentage of moisture 0 – 95% (non condensate)
- Number of batteries 1
- Hour battery rating, A 7
- Battery charging current, A 1
- Expiratory phase 1
- Output Voltage 220 V ±10% (AC)
- Type and number of outlet sockets IEC 320 C13 x 3
- Battery voltage 12
- Input connections Built-in power cord with Schuko plug
- Backup power supply time at 50% load 6 mins
- Output power factor, RF 0,6
- Power, VA 800
- Power, W 480
-
Efficiency in mains operation
70% in battery operation mode
96% in mains operation mode - Intput frequency, Hz 50/60 Hz ±10% (auto-detection)
- Output frequency, Hz 50/60 ±10% (auto-detection)