Uninterruptible power supply SNR-UPS-LIRM-600, Line-Interactive, 600VA, 220-240VAC, 12VDC (1x7Ah)
SNR-UPS-LIRM-600
$ 120.00
On-line, Rack-Mounted, 15kVA/15kW, 3U, 380-415VAC (50/60Hz), 3ph+N+PE, 480VDC (settable even-number batteries from 32 to 44), USB/RS232/DRY CONTACT/SNMP (option)/PARALLEL KIT (option), 5"LCD, IP20, non batteries
Technical Specifications
- Type of UPS Rackmount
- Weight, kg (1) 7,9
-
Operating temperature, °C (1)
0
40 - Phase 1
- Input voltage 220/230/240 V ± 25% (AC)
- Battery type Lead-acid
- Type of UPS (1) Line-interactive
- Dimension, mm (1) 88x480x350
Product Info
Part number: SNR-UPS-LIRM-600Linear-interactive uninterruptible power supply sources (UPS) SNR are designed to protect personal computers, workstations, and servers equipped with switching power supplies. Thanks to the built-in battery, the UPS can operate even during a complete power outage, allowing the user to save data and properly shut down the operating system. SNR-UPS-LID uninterruptible power sources have a built-in autotransformer. The autotransformer regulates the output voltage when the mains voltage changes - in case of excessive increase in mains voltage, the autotransformer reduces the output voltage to an acceptable level, and in case of excessive decrease, it increases it. The autotransformer ensures a specified level of output voltage during fluctuations in mains voltage from nominal. A wide range of allowable mains voltages reduces the number of cases when the UPS switches to battery and significantly extends the service life of batteries.
The compact size and rackmount design allow the SNR-UPS-LIRM UPS to be installed in wall cabinets with a depth of 400mm.
The SNR-UPS-LIRM uninterruptible power supply is equipped with a "cold start" function, which allows the UPS to be forcibly turned on in the absence of mains voltage. The UPS is equipped with a multifunctional LCD display, which shows the status of the electrical network, the level of load, and the degree of battery discharge.Features:
- Voltage increase and decrease AVR
- Wide range of automatic regulation of input voltage
- Digital microprocessor control
- Indication of the main operating modes of the UPS
- Approximated sinusoidal output voltage when running on battery power
- "Cold start" function
- Multi-functional LCD display
- Transformer thermal protection
- RS232 port for UPS monitoring
- Self-diagnosis
- Protection against overcharging, deep discharge
- Protection against short circuits and overloads
Package contents:
- Uninterruptible power supply
- User manual
- RS232 interface cable
- Power cord
- CD with software
Technical Specifications
- Type of UPS Rackmount
- Weight, kg (1) 7,9
-
Operating temperature, °C (1)
0
40 - Phase 1
- Input voltage 220/230/240 V ± 25% (AC)
- Battery type Lead-acid
- Type of UPS (1) Line-interactive
- Dimension, mm (1) 88x480x350
- COM port RS232
- Maximum number of lines 1
- Percentage of moisture 0 – 95% (non condensate)
- Number of batteries 1
- Hour battery rating, A 7
- Battery charging current, A 1
- Expiratory phase 1
- Output Voltage 220/230/240 V ±10% (AC)
- Type and number of outlet sockets Schuko x 2
- Battery voltage 12
- Input connections IEC320 C14
- Backup power supply time at 50% load 10 minutes
- Output power factor, RF 0,6
- Power, VA 600
- Power, W 360
-
Efficiency in mains operation
70% in battery mode
96% in network mode - Intput frequency, Hz 50/60 Hz ±10% (auto-detection)
- Output frequency, Hz 50/60 Hz (auto-detection)