SNR-UPS-LIRM-500-X-SNMP
SNR-UPS-LIRM-500-X-SNMP
$ 299.00
Line-Interactive, Rack-Mounted, 500VA/300W, 2U, 220-240VAC (50/60Hz), 1ph+N+PE, 12VDC, Non Batteries (Charge Current 4A), RS232/SNMP, RJ-45, 4 x IEC-320 C13 (Outputs)
Technical Specifications
- Type of UPS Rackmount
- Weight, kg (1) 7,9
-
Operating temperature, °C (1)
0
40 - Phase 1
- Input voltage 220/230/240 V ± 25% (AC)
- Battery type Lead-acid (external, ordered separately)
- Type of UPS (1) Line-interactive
- Without built-in batteries Available
Product Info
Part number: SNR-UPS-LIRM-500-X-SNMPLinear-interactive uninterruptible power supply sources (UPS) SNR with SNMP card are designed to protect equipment at the access node. This UPS does not have built-in batteries. To provide autonomous operation, it is necessary to connect a 12 VDC battery. The 4 Ampere charging current allows for connecting high-capacity batteries (recommended capacity: 40 Ah, 50 Ah).
There is a slot for an SNMP card on the front panel, designed for remote monitoring of the UPS status. The RS232 port is intended for connection to a PC console port using the UPSmart management software.
SNR-UPS-LIRM uninterruptible power supply sources have a built-in autotransformer. The autotransformer regulates the output voltage when the network voltage changes - in case of excessive increase in network voltage, the autotransformer lowers the output voltage to an acceptable level, and in case of excessive decrease, it raises it. The autotransformer ensures a specified level of output voltage during network voltage fluctuations from nominal. The wide range of allowable network voltages reduces the number of cases when the UPS switches to batteries and significantly extends the battery life.The compact size and rackmount design allow the SNR-UPS-LIRM UPS to be placed in wall cabinets with a depth of 400mm.
Features:
- Slot with SNMP card
- AVR voltage increase and decrease
- Wide range of automatic input voltage regulation
- Digital microprocessor control
- Indication of the main operation modes of the UPS
- Approximated sine wave output voltage when operating on battery power
- "Cold start" function
- Multi-functional LCD display
- Transformer thermal protection
- RS232 port for UPS monitoring
- Self-diagnosis
- Protection against overcharging, deep discharge
- Protection against short circuits and overloads
Delivery set:
- User manual
- Interface cable
- Spare fuses
- CD with software
- Cable for connecting the battery
Technical Specifications
- Type of UPS Rackmount
- Weight, kg (1) 7,9
-
Operating temperature, °C (1)
0
40 - Phase 1
- Input voltage 220/230/240 V ± 25% (AC)
- Battery type Lead-acid (external, ordered separately)
- Type of UPS (1) Line-interactive
- Without built-in batteries Available
- Dimension, mm (1) 88x480x350
- COM port MULT(SNMP card)
- Maximum number of lines 1
- Percentage of moisture 0 – 95% (non condensate)
- Number of batteries 1
- Hour battery rating, A It depends on the capacity of the external batteries
- Battery charging current, A 4
- Expiratory phase 1
- Output Voltage 220/230/240 V ±10% (AC)
- Type and number of outlet sockets IEC 320 C13 x 4
- Battery voltage 12
- Input connections IEC320 C14
- Backup power supply time at 50% load It depends on the capacity of external batteries
- Output power factor, RF 0,6
- Power, VA 500
- Power, W 300
-
Efficiency in mains operation
70% when operating from the battery
96% when operating from the power grid - Intput frequency, Hz 50/60 Hz ±10% (auto-detection)
- Output frequency, Hz 50/60 Hz (auto-detection)