SNR-UPS-LID-2000-XPS
SNR-UPS-LID-2000-XPS
$ 275.68
Line-Interactive, Tower, 2000VA/1600W, 220-240VAC (50/60Hz), 1ph+N+PE, 48VDC, Non Batteries (Charge Current 25A), USB/RS232/SNMP (option), 1 x IEC-320 C13, 2 x SCHUKO (Outputs), Pure Sine, LCD
Technical Specifications
- Type of UPS Desktop
- Weight, kg (1) 17,8
-
Operating temperature, °C (1)
5
40 - Phase 1
- Input voltage 165-280V (AC)
- Battery type Lead-acid (external, ordered separately)
- Type of UPS (1) Line-interactive
- Without built-in batteries Available
Product Info
Part number: SNR-UPS-LID-2000-XPSLinear-interactive uninterruptible power sources (UPS) SNR, LID-XXXX-XPS series (without built-in batteries), occupy an intermediate position between simple, inexpensive backup sources ("Off-Line") and efficient, expensive UPS with double energy conversion (On-Line). The main difference of LID-XXXX-XPS series UPS from offline backup sources is that it can provide normal power supply to the load, even when there are deviations in the network voltage parameters, without switching to battery mode, which in turn positively affects the service life of the battery. UPS of this series are designed to work in conjunction with external batteries with a capacity of 120 Ah to 200 Ah (taking into account the capabilities of the built-in UPS charger), which provides longer battery support for the load.
LID series UPSs have a "Cold Start" function that allows the UPS to be forcibly turned on in the absence of mains voltage, as well as an "Auto Start" function that allows the load to be automatically powered on when the mains voltage is restored, without the need for additional manipulation.
The built-in USB port allows for monitoring the main parameters of the UPS from a computer, as well as performing a proper shutdown automatically. In addition, the UPS is equipped with a multifunctional LCD display with backlighting, which displays current information about the operation of the UPS.
UPS of this series provide output voltage with a "clean" sine wave and can serve as an alternative to double conversion (On-Line) UPS. In addition to providing backup power to devices with pulse power supplies, these UPS can also be used to power electric motors, circulator pumps for heating systems, and other equipment that is critical to the output signal waveform.
The advantage of linear-interactive UPS is their comparative simplicity and reliability, lower cost compared to "On-line" solutions, as well as high efficiency in "from the network" mode. The disadvantages include a slight delay in switching (several milliseconds) to "from battery" mode and a stepped (less smooth compared to "On-line") regulation of the output voltage. Additionally, when placing the UPS, it is necessary to take into account the presence of a built-in cooling fan. Features:
-
Output voltage with "clean" sine wave
-
Built-in autotransformer regulates output voltage (AVR)
-
Wide range of automatic regulation of input voltage
-
Digital microprocessor control
-
Adjustable ECO mode and no-load shutdown
-
Automatic power-on when network power is restored
-
Indication of the main operating modes of the UPS
-
"Cold start" function
-
USB port for monitoring the UPS
-
Possibility of installing an SNMP card and remote monitoring
-
Self-diagnosis
-
Battery protection against overcharging and deep discharge
-
Protection against short circuits and overloads
Package contents:
-
User manual
-
USB interface cable
-
Power cable (input)
-
Software storage device
-
Battery connection cable
Technical Specifications
- Type of UPS Desktop
- Weight, kg (1) 17,8
-
Operating temperature, °C (1)
5
40 - Phase 1
- Input voltage 165-280V (AC)
- Battery type Lead-acid (external, ordered separately)
- Type of UPS (1) Line-interactive
- Without built-in batteries Available
- Dimension, mm (1) 215x144x345
-
COM port
RJ45)
USB - Maximum number of lines 1
- Percentage of moisture ≤ 93%
- Number of batteries 4
- Hour battery rating, A It depends on the capacity of external batteries
- Battery charging current, A 20
- Expiratory phase 1
- Output Voltage 188-245 V (AC)
-
Type and number of outlet sockets
IEC 320 C13 x 1
Schuko x 2 - Battery voltage 48
- Input connections IEC320 C14
- Backup power supply time at 50% load It depends on the capacity of external batteries
- Output power factor, RF 0,8
- Power, VA 2000
- Power, W 1600
-
Efficiency in mains operation
80% when operating from a battery
95% when operating from a power source - Intput frequency, Hz 50/60 Hz ±10% (auto-detection)
- Output frequency, Hz 50/60 Hz ± 0.3 Hz (adjustable)