Managed PDU (SNR-SMART)

SNR-SMART

$ 52.80
Managed PDU designed for connecting equipment to a 220-volt alternating current network, with the ability to disconnect certain sockets to reboot the equipment. Specifically developed for SNR-ERD.

Technical Specifications

  • Number of controlled loads (2) 4
  • Autonomous power supply (1) No
  • Output voltage (1) 220
  • Column solution 19 Yes

Product Info

Part number: SNR-SMART

SNR SMART is designed to connect equipment to the AC power supply with a voltage of 220 volts, with the ability to disconnect some sockets to reboot the equipment.

Specifications: 220V, 16A.

The main control element is a relay with normally closed contacts, which is installed inside SNR SMART. The operating voltage of the relay is 5 volts. The load voltage is 100-250 volts. The relay is capable of withstanding loads up to 40 amps.

To disconnect the controlled part of the sockets, it is necessary to apply a voltage of 5 volts to the control wire, at which point the relay will operate and open its contacts. Control is carried out on 4 sockets out of 8. The switching occurs simultaneously on all 4 sockets, there is no separate control of the sockets.


Technical Specifications

  • Number of controlled loads (2) 4
  • Autonomous power supply (1) No
  • Output voltage (1) 220
  • Column solution 19 Yes

Managed PDU (SNR-SMART)

$ 52.80