Transceiver SFP+ copper, 20m, RJ45
SNR-SFP+T
$ 80.00
SFP 10GBase-T, RJ-45, distance up to 20m
Technical Specifications
- Transceiver speed 10Gbps
- Transceiver type Copper
- Connector type RJ45
- Max distance 0,02
- Form-factors transceivers SFP+ transceiver
- Transmission distance (range), km < 1
Product Info
Part number: SNR-SFP+TTwisted pair (10GBaseT, RJ-45 connector), SFP, distance up to 20m.
SFP (Small Form-factor Pluggable) is designed to be installed in the slot of a router or switch and ensure its connection to the network using the desired interface. SFP converters support hot swap mode. Various transceivers allow you to connect the necessary equipment to various transmission media: multimode fiber, single-mode fiber, and twisted pair.
The SFP-T transceiver of the 10GBase-T standard provides data transmission over a twisted pair CAT6A/CAT7, at a distance of up to 20 meters.
Technical specifications:
| Data transfer rate | 10Gbps |
| Maximum twisted pair length of category 6A/7 | 20 m |
| Operating temperature | 0~70C |
| Supply voltage | +3.3 V |
| Connectors for twisted pair cable | RJ45 |
Most models of optical SNR transceivers can be manufactured in the industrial version with an operating temperature range: of -40..+85C or in the version with an extended temperature range: of 0..+85C. Check with managers about the possibility of manufacturing this and other models in such modifications.
All SNR optical transceivers with a transmission rate of 10G and above support the digital diagnostics and monitoring function (DDMI/DOM).
Models of optical SFP transceivers 1.25G can also be manufactured with support for the DDMI function. Such models have an additional prefix "DDM" in the article (Part Number, P/N). CWDM and DWDM SFP support DDMI by default.
Compatibility of optical SNR transceivers with Ethernet equipment of Cisco, Extreme, Juniper, HP, Dell, Force10, Huawei, Dlink, ZTE, etc. manufacturers, as well as with equipment supporting other data transmission technologies: FibreChannel: 1/2/4/8/10/16G FC, SONET/SDH: STM-1/OC-3, STM-4/OC-12, STM-16/OC-48, STM-64/OC-192, etc. check with the managers.
It is possible to manufacture otpical transceivers with your logo and P/N, please specify the details before ordering.
Technical Specifications
- Transceiver speed 10Gbps
- Transceiver type Copper
- Connector type RJ45
- Max distance 0,02
- Form-factors transceivers SFP+ transceiver
- Transmission distance (range), km < 1